The printing industry has seen tremendous growth over the years that has made our day easier and more efficient. There are many printing devices on the market, each with different technical specifications. The Canon Pixma Mx922 printer is a great example of this. This
Canon printers offer the highest quality printing results and are considered to be the best in their class. Sometimes technology can be so inept that it slows down the whole process and reduces error handling methods. The Canon printer error code b200 can slow down the overall printing speed. This error code refers to the ink cartridge area.
This blog post explains in detail how to fix the Canon b200 error mx922.
What does the b200 error mean?
A typical error code of b200 on the Canon Pixma MX922 printer means that the print head is defective.
What is the cause of the Canon Pixma X922 Printer displaying a b200 error?
The Canon printer models may display error code 200 which could slow down the printing speed and the processing. Below are some reasons why this might happen.
- Cartridge dried up
- Replica ink cartridge
- Overheating
- Jamming cartridges
- Waste tank filled
Dry up cartridge
The Canon b200 error can occur if you don’t use your copier for a prolonged period of time and then try to use it again. Two types of cartridges are accepted by the Canon mx922 printer: 2 and 4+. Both will dry out if they are not used for a prolonged period.
Replica ink cartridge
A low-quality ink can sometimes make a big difference in the system. It can ruin your printing experience if you put it in the system. It is best to use the original link from the canon printer.
Overheating
Canon printer error b200 may appear on your monitor if you publish too many documents at one time for a long period of time. Overfilled instructions can cause the printer to overheat and lose connection to its cartridge. The printer stops working and displays the Canon support code b200.
Jamming cartridges
Jamming the ink cartridges area or section of the printer can cause serious problems. This caused the paper to drip. It is recommended to thoroughly clean and inspect the cartridge section.
Fill with waste tank
Canon mx922 includes an ink waste tank. It collects and stores ink slurry during cleaning. If the tank is not yet full, Canon mx922 error 200 will be displayed. You must empty the tank and inspect the problem.
How do I fix the Canon Error Code b200?
This is how to troubleshoot the Canon printer error code b200.
Start the printer
Restarting the printer machine is one of the easiest ways to fix an error code on a Canon printer. Restart the printer machine to see if it stops giving you the error code b200 for Canon mx922.
Reinstall cartridges
These steps are necessary to complete the task.
- All cartridges should be re-configured. Re-install the cartridges or delete the ones you don’t need.
To learn more about the problem and the solutions, check out the cartridge.
Clean the print head and reinstall it
- Remove the printer head from the machine and gently clean the gold connections. After everything is cleaned, ensure that the ribbon cable connector has been securely plugged into your printer head before you reinstall it.
- Once you have removed the printer head, rinse it under hot water to remove any link.
Reload drivers
A corrupted printer driver software can slow down the system’s overall performance. Reloading the driver is the only way to fix the printer system.
To view the pertinent information, tap on the printer driver.
Conclusion
Canon printers are well-known for their high-quality prints. You can also correct the inconsistencies, but be careful if you decide to rinse your printer head. If you don’t have any knowledge about devices, it is not recommended to do this. Otherwise, you could end up damaging the printer head. Before you settle on one method, it is a good idea to try other methods. For further assistance, get in touch with us
