Extenders are the device that strengthens the wireless network connection by multiplying the signals. This is the most useful device to enjoy the maximum internet connectivity in all the areas of your home, office, factory, or any other location. Among various extender providers, TP-Link is one of the highly-known brands that offers the premium routers and extenders. If you have a TP-Link extender and are looking for the process to set it up, then, you have arrived at the right location. This is a comprehensive TP Link Extender Setup article. Here, you will get complete assistance to successfully set up your TP-Link extender.
Performing the TP-Link extender setup is not a nuclear science and can be done quite easily if you follow the instructions given below carefully and patiently. Having a Wifi extender is necessary if you wish to increase the internet connectivity range of your router. Thus, in today’s post, we shall discuss how we can set up a router extender in a few simple and necessary steps.
TP-Link wifi extender setup
- The first step is to turn off the router you are using along with the modem and computer.
- After that, you have to connect the modem to the router’s WAN port.
- You can use the Ethernet cable for connection purpose.
- Now, again use the Ethernet cable and plug it in the LAN port of the router.
- Connect the other end of the same cable to the computer.
- Once you connect these cables, you need to power on your router and computer.
- Wait for some time and then power on the modem.
- Next, go to the web access page of your router which is www.tp-Link.com/us.
- Log in using the admin details of your router.
- Further, enter the username and password very carefully.
- Now, you need to check the status page and see if the details in the WAN tab are correct. This will let you know that the TP-Link extender setup is done successfully or not.
TP-Link range extender setup without WPS
- Plug-in the extender to the power socket.
- Connect it to your PC using the Ethernet cable.
- From your browser, go to the tplinklogin.net or TPlinkrepeater.net page.
- Here, tap on ‘Quick Setup’ and select your ‘Region’.
- Tap ‘Next’ once again to initiate the scanning of available networks.
- After it is done, click on the ‘Next’ option.
- Further, you’ll be prompted to enter the password.
- Do so, and click on the ‘Next’ option again.
This is how you do the TP-Link extender setup without the WPS button.
Alternate Steps to Perform the Quick Setup of your Extender
When you hit the Enter key, you might get a popup box for your administration credentials. Enter the username and passcode to successfully reach the webpage. The TP Link Extender Setup window will now be introduced on your system. Now, you have to follow the given directions to complete the setup.
- In the primary window, tap the “Next” button.
- Following this, you have to choose the region you are living in. Make the preferred selection from the drop-down list and press “Next”.
- The wireless network detection process will now commence. It will take a couple of minutes to complete its search. Wait patiently for its completion.
- When it’s done, the list of all the nearby wireless networks will turn up on your screen. From the listed networks, choose the host TP-Link network and click “Next”.
- The network settings of the selected connection will come into view. Here, you need to provide the security key of your wireless network.
- Next to this, you are provided with an option to choose the SSID for your extended network. You can either use the same SSID or change it by selecting the “Customize” option.
- After that, click “Next” and the settings of your router, as well as an extender, will appear on your screen. Review the settings and tap “Finish”.
- The process of router and extender connection along with the settings configuration will now start. It will take up to 2 minutes to complete. You have to wait until it’s done.
When it’s done, the extender will save all the router settings you have done i.e. TP Link range extender setup with ethernet cable process done now.
TP-Link extender not connecting to the router
If you are not able to connect the TP-Link extender to the router, then you can push the WPS button on your router and see if the WPS LED flashes or not. If it still does not work, then you can try to push this button once again and see if it works or not. You can also check that all the cables along with the power cable are connected successfully or not. After verifying all the connections, your wifi extender should connect successfully.
How do I access my router TP-Link?
In the web browser, type the IP address of your router. For the IP address, refer to the user manual that came with it. After you enter the IP address, hit the ‘Enter’ key and login to your router’s admin page by inputting the correct login details which by default are “admin”. Once you log in successfully, you can change or access any settings of your router.
