The Error Code E13 is a generic error code. You do not need to be concerned about this type of error. Troubleshooting The Canon Printer Error Code E13
The Error Code E13 is a generic error code. You do not need to be concerned about this type of error. Troubleshooting The Canon Printer Error Code E13 Solution is significantly easy. This Error appears when the framework believes the cartridge’s ink has run out. It indicates that you urgently need to replace or replace the ink cartridge. Your printer will stop printing and filtering as a result of this error. If you use refilled or remanufactured cartridges, you may see low or discharge error warnings. The cartridge in question is unable to recognise the sharp ink inside.
To guarantee that the printer has adequate ink, standard inkjet printers determine the number of pages printed and the amount of ink in the cartridge. It will display this error if it is unable to recognise enough ink.
What does the Canon Printer Error Code E13 Mean?
Before going into the troubleshooting Canon Printer Error Code E13 Solution, it’s important to understand what this problem is about and why it occurs. When the cartridge ink runs out, the Canon Printer Error Code E13 appears on the monitor screen. When this problem occurs, the printer will stop all printing operations and refuse to accept any new printing or scanning jobs.
When the cartridges used aren’t genuine, this can happen. Fake manufacturers refill the cartridges and sell them, causing this error code to appear again. This error may also appear if the cartridge’s ribbon is stained with black.
Troubleshooting Procedures for Canon Printer Error Message E13:
This error isn’t as complicated as you might think. You must follow the below-mentioned instructions in order to correct this common printer error in a timely manner. Here you will find the most appropriate solution for dealing with such mishap messages in the shortest amount of time. For more dependable arrangements, go to Canon Printer Customer Care Services.
Solution 1: Ignore the message.
- First and foremost, you must navigate your Canon Device’s Stop, Reset, or Resume button.
- After that, press and hold the reset button for at least five seconds. Release the button after a long period of holding it. Even if the ink in the cartridges has run out, this will allow you to continue printing.
- Without an on-screen ink level check, the Canon printer continues with its printing process. You will be able to print until and unless the ink cartridges have physically run out. In any case, you’ll need to replace it with a new one in the shortest period possible to improve print quality.
Solution 2: Check to see whether the printer has sustained any additional damage.
Even if the inks are empty, continuing to use your printer might do serious damage to your system. On an extended version, your excessive use may burn your print head. So, to get rid of this problem, change the ink cartridges as soon as feasible.
How to Resolve Canon Printer Error Code E13
A step-by-step procedure for resolving the Canon Printer Code E13 is provided below.
- Check to see if the printer is turned on.
- Turn off the ink gauge without cancelling any printing commands.
- Simply press and hold the reset/stop button once the problem code appears.
- Also, press and hold the power button.
- Hold the button down for 3-6 seconds until the error code goes away.
- The printer will then be turned off.
- Turn on the printer after 5 seconds.
- A yellow light should blink on the printer’s LED light. The printer should now function properly.
The approach outlined above is a simple and thorough solution to the printer problem E13. Following these procedures in the correct order will undoubtedly resolve the issue.